Components
The SMART Board 6000 series interactive display with iQ consists of the following components:
No. | Name | More information |
|---|---|---|
Pictured | ||
1 | Screen | |
2 | Pen with eraser (×2) | |
3 | Front control panel | |
4 | Presence detection sensor | |
5 | Connector panel | |
6 | iQ appliance (and Intel Compute Card) | |
7 | ||
Not pictured | ||
8 | Menu control panel 1 | Adjusting SPNL-6000-V2, SPNL-6000-V1 and SPNL-6000P on-screen display menu settings |
9 | Speakers | |
iQ appliance (and Intel Compute Card)The iQ appliance is installed in the accessory slot on the back of the following models:
SPNL‑6365‑V3/SBID‑6365
SPNL‑6375‑V3
SPNL‑6265‑V3/SBID‑6265
SPNL‑6275‑V3
SPNL‑6365‑V2
SPNL‑6375
SPNL‑6265‑V2
SPNL‑6275
SPNL‑6365P
SPNL‑6375P
SPNL‑6265P
SPNL‑6275P
Take advantage of iQ technology and access collaborative tools.
The SPNL‑6365‑V3/SBID-6365, SPNL‑6375‑V3, SPNL‑6365‑V2, SPNL‑6375, SPNL‑6365P and SPNL‑6375P models have an Intel Compute Card in the appliance to provide a fully functional Windows 10 solution at your fingertips, without the need for an external PC or cabling.
Caution
The accessory slot’s maximum available power is 60 W. The slot is not a limited power source. To reduce the risk of fire, make sure that accessories connecting to the slot satisfy the fire enclosure requirements of IEC 60950‑1.
Tip
Use the Find my OPS module wizard on the SMART support site to identify your model of iQ appliance.
ScreenThe screen sizes vary by model:
Model | Diagonal | Width | Height |
|---|---|---|---|
SPNL‑6000‑V3/SBID‑6000 models | |||
SPNL‑6365‑V3/ | 64 1/2" (163.9 cm) | 56 1/4" (142.8 cm) | 31 5/8" (80.4 cm) |
SPNL‑6375‑V3 | 75" (190.5 cm) | 65" (165.2 cm) | 38 5/8" (93 cm) |
SPNL‑6265‑V3/ | 64 1/2" (163.9 cm) | 56 1/4" (142.8 cm) | 31 5/8" (80.4 cm) |
SPNL‑6275‑V3 | 75" (190.5 cm) | 65" (165.2 cm) | 38 5/8" (93 cm) |
SPNL‑6065‑V3/ | 64 1/2" (163.9 cm) | 56 1/4" (142.8 cm) | 31 5/8" (80.4 cm) |
SPNL‑6075‑V3 | 75" (190.5 cm) | 65" (165.2 cm) | 38 5/8" (93 cm) |
SPNL‑6000‑V2 models | |||
SPNL‑6365‑V2 | 64 1/2" (163.9 cm) | 56 1/4" (142.8 cm) | 31 5/8" (80.4 cm) |
SPNL‑6375 | 75" (190.5 cm) | 65" (165.2 cm) | 38 5/8" (93 cm) |
SPNL‑6265‑V2 | 64 1/2" (163.9 cm) | 56 1/4" (142.8 cm) | 31 5/8" (80.4 cm) |
SPNL‑6275 | 75" (190.5 cm) | 65" (165.2 cm) | 38 5/8" (93 cm) |
SPNL‑6065‑V2 | 64 1/2" (163.9 cm) | 56 1/4" (142.8 cm) | 31 5/8" (80.4 cm) |
SPNL‑6075 | 75" (190.5 cm) | 65" (165.2 cm) | 38 5/8" (93 cm) |
SPNL‑6000‑V1 models | |||
SPNL‑6055 | 54 1/2" (138.4 cm) | 47 5/8" (121 cm) | 26 3/4" (68 cm) |
SPNL‑6065 | 64 1/2" (163.9 cm) | 56 1/4" (142.8 cm) | 31 5/8" (80.4 cm) |
SPNL‑6000P models | |||
SPNL‑6365P | 64 1/2" (163.9 cm) | 56 1/4" (142.8 cm) | 31 5/8" (80.4 cm) |
SPNL‑6375P | 75" (190.5 cm) | 65" (165.2 cm) | 38 5/8" (93 cm) |
SPNL‑6265P | 64 1/2" (163.9 cm) | 56 1/4" (142.8 cm) | 31 5/8" (80.4 cm) |
SPNL‑6275P | 75" (190.5 cm) | 65" (165.2 cm) | 38 5/8" (93 cm) |
SPNL‑6065P | 64 1/2" (163.9 cm) | 56 1/4" (142.8 cm) | 31 5/8" (80.4 cm) |
SPNL‑6075P | 75" (190.5 cm) | 65" (165.2 cm) | 38 5/8" (93 cm) |
Cameras in the corners of the screen track finger and pen positions across the display. The screen is surrounded by a channel that contains reflective tape.
Caution
Keep the reflective tape dry.
Do not remove or damage the reflective tape.
Important
Do not attach adhesive notes or other items to the screen because they will interfere with the cameras.
Do not place anything in the reflective tape channel because it will interfere with the cameras.
Pens with erasersThe display comes with two pens with erasers attached.
The display’s bottom frame includes magnetic holders for the pens. Removing a pen from the holders activates it, and you can use the pen to draw or erase digital ink.
Caution
When you return the pen to the magnetic holder, make sure it’s centered in its holder to keep it from falling and being damaged.
Important
Use only pens designed for SMART Board 6000 and 6000 Pro series interactive displays (see Comparing SMART product pens).
Front control panelThe front control panel contains the Standby, Input Select, Mute, volume control and on-screen display menu buttons.
No. | Name | Procedure |
|---|---|---|
1 | Standby |
|
2 | Select |
|
3 | Mute |
|
4 | Decrease |
|
5 | Increase |
|
6 | Move Up 5 |
|
7 | Move Down 6 |
|
8 | Menu 7 |
|
Important
If there is a film over the front control panel, remove it before using the front control panel.
If the buttons don’t respond when you press them, the front control panel might have been disabled (see FBC Control). To re-enable the front control panel, press the Standby button until the buttons light.
In normal operation, all buttons are white.
The Standby button also functions as an indicator light:
Indicator light | Status | Procedure |
|---|---|---|
Solid white | Normal operation |
|
Off | Not receiving power |
|
Solid amber | DPMS (power management) mode |
|
Slowly flashing amber | Standby mode |
|
Flashing amber | No USB connection from the connected computer |
|
Slowly flashing white | SMART Board service not running on the connected computer |
|
to exit DPMS mode.Presence detection sensor
The display has a presence detection sensor on its bottom frame that can detect people up to 16' (5 m) away when the display is in Standby mode.
If the Turn On Display option is enabled, the display turns on when the sensor detects people in the room. If the room is empty for a specified period, the display returns to Standby mode.
Internal speakersThe display includes two 10 W integrated speakers. You can also connect external speakers (see Connecting external speakers).