Adjusting SPNL-6000-V3/SBID-6000 on-screen display menu settings
On SPNL‑6000‑V3/SBID‑6000 models, you can access the on-screen display menu using the front control panel (see Front control panel).
Changing settings in the on-screen display menuTo change settings in the on-screen display menu
Press
on the front control panel.The on-screen display menu appears.
Press
and 
to highlight a menu item, and then press 
.Press the
and buttons to highlight a menu option.Press
and 
to change the menu option’s setting.OR
Press
to open the menu option’s submenu. (Repeat steps 3 and 4 to change settings in the submenu.)Press and hold
until the on-screen menu closes.
Picture menu optionsOption | Values | Function | Notes |
|---|---|---|---|
Picture Mode | Standard User Dynamic | Sets the picture mode | Select User to customize brightness, contrast, sharpness and other Picture options. Select one of the other values to set brightness, contrast, sharpness and other Picture options to default values. |
Brightness | 0–100 | Sets the overall brightness of the image and background | You can modify this option only if you select User in Picture Mode. |
Contrast | 0–100 | Sets the difference in brightness between the lightest and darkest parts of the image | You can modify this option only if you select User in Picture Mode. |
Sharpness | 0–100 | Sets the image sharpness | You can modify this option only if you select User in Picture Mode. |
Color temperature | Normal Warm User Cool | Sets the color temperature | Select User to customize the amount of red, green and blue in the image. Select one of the other values to set the amount of red, green and blue in the image to default values. |
Red | 0–100 | Sets the amount of red in the image | You can modify this option only if you select User in Color Temperature. |
Green | 0–100 | Sets the amount of green in the image | You can modify this option only if you select User in Color Temperature. |
Blue | 0–100 | Sets the amount of blue in the image | You can modify this option only if you select User in Color Temperature. |
Local Dimming | On Off | Enables or disables local dimming mode | [N/A] |
Picture Reset | [N/A] | Resets all options in the Picture menu to their default values | [N/A] |
Sound menu optionsOption | Values | Function | Notes |
|---|---|---|---|
Volume | 0–100 | Sets the volume | [N/A] |
Balance | -50–50 | Balances the left and right volume | [N/A] |
Sound Reset | [N/A] | Resets all options in the Sound menu to their default values | [N/A] |
Setup menu optionsOption | Values | Function | Notes |
|---|---|---|---|
On Off | Enables or disables Power Save mode | When Power Save mode is enabled and there is no video input, No Signal appears on the screen for 90 seconds before the display turns off. | |
On Off | Enables or disables the front control panel | [N/A] | |
On Off | Enables or disables the ability to wake the display by touching the screen | [N/A] | |
On Off | Enables or disables presence detection | [N/A] | |
Turn On Display | On Off | Sets the display to turn on if the presence detection sensor detects users in the room | Set this option to “Off” if you prefer the display to remain in Standby mode when users first enter the room. A user then needs to press |
Re-enable Time | 1Min.–10Min. | Sets a period of time between when the display is turned off and when it detects motion again | Set this option to give users enough time to leave the room after they turn off the display. |
Auto Power Off | 15Min.–240Min. | Sets how long the display waits between when it last detects motion and when it turns off | [N/A] |
Video input detect | Off OPS/HDMI | Specifies the default video input source when video input detection is enabled | With video input detection, the display shows the selected video input when there are no computers or other input sources connected. Video input detection is useful in scenarios where a user connects a laptop to the display for a meeting and forgets to return to the default video input after disconnecting the laptop. |
Setup Reset | [N/A] | Restores the setup settings to their default value | [N/A] |
[N/A] | Resets options in all menus to their default values | [N/A] |
or touch the screen (if the Wake to Touch option is enabled) to turn on the display.About menu optionsOption | Values | Function | Notes |
|---|---|---|---|
[N/A] | Shows the display’s model number | [N/A] | |
[N/A] | Shows the display’s serial number | [N/A] | |
[N/A] | Shows the display’s scaler firmware version | [N/A] | |
Touch firmware version | [N/A] | Shows the display’s touch firmware version | [N/A] |
OPS Information | [N/A] | Indicates whether a module is installed in the accessory slot | [N/A] |
USB Update | [N/A] | Updates the scaler firmware using a connected USB drive | [N/A] |
Models |
|
Keywords |
|
Related documents |