Sharing from a Mac computer

1. Open SMART Mirror on the display.

   The home screen for sharing opens, showing you the information you’ll need to connect.

   Note 

   If using an iQ 3 display, the button will appear as Screen Share.

2. Follow the instructions for your device to use AirPlay.

   Important 

   If your device is connected to a different network than the display, make sure Bluetooth is enabled on both the device and the display before trying to connect. Otherwise, the device must be on the same network as the display to connect. Learn more about troubleshooting BLE discovery using AirPlay and SMART Mirror.

3. Select the display’s name. The name of the display is shown either in the screen's upper right corner or on the left side.

The Screen Mirror app is an alternate method of sharing your device’s screen, and it might be useful when the network doesn’t support AirPlay. The SMART Mirror app also includes several tools that aid in presenting and collaborating.

To share your Mac computer’s screen on the display using the SMART Mirror app

1. Download the SMART Mirror app for your device.

2. Open SMART Mirror on the display.

   The home screen for sharing opens, showing you the information you’ll need to connect.

   Note 

   If using an iQ 3 display, the button will appear as Screen Share.

3. Open the SMART Mirror app on your device.

4. (Optional) To connect as a teacher, click Sign in as a Teacher and follow the on-screen instructions to sign in.

   If you’ve previously signed in as a teacher, the SMART Mirror app signs you in by default.

   

   Note 

   Signing in as a teacher requires Moderator mode to be enabled in SMART Mirror.

5. Connect to a display by entering the session ID, or using the single-click option (if it has been set up on the display):

   • Use a session ID

     1. Enter the ID shown on the display.

        If the SMART Mirror home screen displays a 6- or 10-digit session ID, type the session ID. The number of digits indicates whether your device needs to be on the same network as the display:

        • 6 digits: SMART Mirror is connected to the internet, allowing a connection across any network. When connecting using a 6-digit session ID, you can connect from anywhere. You do not need to be on the same network as the display.

        • 10 digits: SMART Mirror allows local connections only. To connect using a 10-digit session ID, your device must be on the same network as the display.

          Tip 

          You can change this setting on the display.

     2. Enter your name.

     3. (Optional) To enable touchback, click Settings in the bottom left corner and select the Touchback control option.

     4. Click Connect.

   • Use single-click

     1. If you haven’t signed in as a teacher, enter your name.

     2. (Optional) To enable touchback, click Settings in the bottom left corner and select the Touchback control option.

     3. Choose the display and select Join.

        

        Note 

        If you do not see the display listed, make sure your device is on the same network as the display, and that the display is set to be discoverable.

6. This table describes what you can do after your device has connected to the display:

   Option	Description	Steps
   Share your device’s screen	Share your device’s entire screen. Note  Touchback is not available when sharing a window or additional screens.	Click Share my screen. Choose to share the entire screen or select a window to share. Click Share.
   Upload a file, photo, video, or link to share	Add a file such as a PDF, image, video, or link from your device. Shared videos and links can be opened on the display. Others who've connected their devices to the display using SMART Mirror can open any shared files and download them to their devices. After a session ends, all shared files are removed.	Click Shared items. Click Add items. Choose the item type and select the file you want. The file is added to the session's shared files.
   Moderate the session	Choose who can share the screen. Note  Before you can use this feature, make sure it’s enabled in SMART Mirror’s settings.	SeeInvite and manage presenters
   Enhanced grid control	Manage the grid view more effectively by making connected students full-screen or minimizing them directly from your own device. This eliminates the need to approach the display, offering greater convenience and flexibility during sessions.	SeeUse the grid view
   Remote control	Take full control of a SMART Board display from anywhere in the classroom. Note  Before you can use this feature, make sure it’s enabled in SMART Mirror’s settings.	SeeUse your device as a remote control
   Stop sharing	Stop sharing your device’s screen.	Open the SMART Mirror app on your device. Click or tap Stop presenting.

   Note 

   Moderator and remote control options are only available if you’ve connected as a teacher.

   SeeConnecting as a teacher

Use the SMART Mirror web app allows you to share your Mac computer’s screen without the need to download a specific app.

1. Open SMART Mirror on the display.

   The home screen for sharing opens, showing you the information you’ll need to connect.

   Note 

   If using an iQ 3 display, the button will appear as Screen Share.

2. In a supported 1 For best results, use a Chrome or Edge browser. browser, go to smartmirror.link.

3. (Optional) To connect as a teacher, click Sign in as a Teacher and follow the on-screen instructions to sign in.

   If you’ve previously signed in as a teacher, the SMART Mirror app signs you in by default.

   

   Note 

   Signing in as a teacher requires Moderator mode to be enabled in SMART Mirror.

4. Connect to a display by entering the session ID, or using the single-click option (if it has been set up on the display):

   • Use a session ID

     1. Enter the ID shown on the display.

        If the SMART Mirror home screen displays a 6- or 10-digit session ID, type the session ID. The number of digits indicates whether your device needs to be on the same network as the display:

        • 6 digits: SMART Mirror is connected to the internet, allowing a connection across any network. When connecting using a 6-digit session ID, you can connect from anywhere. You do not need to be on the same network as the display.

        • 10 digits: SMART Mirror allows local connections only. To connect using a 10-digit session ID, your device must be on the same network as the display.

          Tip 

          You can change this setting on the display.

     2. Enter your name.

     3. Click Connect.

   • Use single-click

     1. If you haven’t signed in as a teacher, enter your name.

     2. Choose the display and select Join.

        

        Note 

        If you do not see the display listed, make sure your device is on the same network as the display, and that the display is set to be discoverable.

5. This table describes what you can do after your device has connected to the display:

   Option	Description	Steps
   Share your device’s screen	Share your device’s entire screen.	Click Share my screen. Choose to share the entire screen or select a window to share. Click Share.
   Upload a file, photo, video, or link to share	Add a file such as a PDF, image, video, or link from your device. Shared videos and links can be opened on the display. Others who've connected their devices to the display using SMART Mirror can open any shared files and download them to their devices. After a session ends, all shared files are removed.	Click Shared items. Click Add items. Choose the item type and select the file you want. The file is added to the session's shared files.
   Moderate the session	Choose who can share the screen. Note  Before you can use this feature, make sure it’s enabled in SMART Mirror’s settings.	SeeInvite and manage presenters
   Enhanced grid control	Manage the grid view more effectively by making connected students full-screen or minimizing them directly from your own device. This eliminates the need to approach the display, offering greater convenience and flexibility during sessions.	SeeUse the grid view
   Remote control	Take full control of a SMART Board display from anywhere in the classroom. Note  Before you can use this feature, make sure it’s enabled in SMART Mirror’s settings.	SeeUse your device as a remote control
   Stop sharing	Stop sharing your device’s screen.	Open the SMART Mirror app menu. Select Quit SMART Mirror App. Click Exit session. Your screen is no longer shared, and the SMART Mirror app closes.

   Note 

   Moderator and remote control options are only available if you’ve connected as a teacher.

   SeeConnecting as a teacher