Adjusting display settings

Enable

Disable

Enables or disables connecting to a network with the wired RJ45 jacks.

Enabling Ethernet disables Wi-Fi.

Enable

Disable

The display automatically acquires an IP address from a DHCP server on your network.

Enabling Wi-Fi hotspot allows you to connect your mobile device to the display using Wi-Fi for screen sharing.

Enable

Disable

Enter a static IP address.

Use the on-screen keyboard or connect a USB keyboard to the USB Type-A receptacle on the front connector panel to enter information.

Wi-Fi

Enable

Disable

Enables or disables connecting to a network wirelessly.

Turn on Wi-Fi to discover networks.

Enabling Wi-Fi disables Ethernet.

Enable

Disable

Enables or disables the Wi-Fi hotspot.

N/A

N/A

Sets the network name, security, password and access point frequency.

Use the on-screen keyboard or connect a USB keyboard to the USB Type-A receptacle on the front connector panel to enter information.

Network status

N/A

Shows information about the display’s current network connection.

N/A

Enable

Disable

Turns lock screen on or off.

The lock screen appears after the display wakes.

N/A

Select a custom image for the lock screen.

Only .png, .jpg, and .bmp files are supported

Save the wallpaper file to a USB drive and insert the drive in the USB Type-A receptacle on the front control panel.

N/A

Turns off the custom image for the lock screen.

N/A

Lock screen password

Enable

Disable

Set a PIN to unlock the lock screen.

N/A

Settings security

Enable

Disable

Set a PIN to access certain settings.

When Settings security is enabled, only Advanced and About settings are available. To access the other settings, tap the setting and enter the PIN.

N/A

Sets the background image on the display.

Only .png, .jpg, and .bmp files are supported

Save the wallpaper file to a USB drive and insert the drive in the USB Type-A receptacle on the front control panel.

[Apps]

Select which apps appear in the launcher.

N/A

[Apps]

Select three apps to appear on the home screen.

Tap the app you want to remove from the home screen. Then select the app you want to appear on the home screen instead.

480p

1080p

4K

Select the output resolution.

Ensure the device that is receiving the display’s HDMI out signal matches the selected output resolution.

15 minutes

30 minutes

45 minutes

60 minutes

Always on

When a time interval is selected, the display’s screen will turn off even if the connected computer or device is still on.

If iQ is selected, the display’s screen will not turn off when a time interval is selected.

N/A

Automatically sets the display’s brightness based on the room’s brightness.

The ambient light sensor can detect the room brightness and adjust the display’s screen brightness.

N/A

Sets the display’s brightness level.

Disable Auto to set the brightness manually.

N/A

Sets the display’s volume level.

N/A

[OTA servers]

Sets which server the display connects to for updates.

Default is Auto.

The display must be connected to the internet to check for system software updates.

Enable

Disable

Enables or disables checking for and downloading updates to the display’s firmware.

Enabled by default.

If this is disabled, manually check for updates in Update.

Power saving mode

Enable

Disable

Enables or disables power saving mode.

Enabled by default.

When enabled, power saving mode activates after 90 minutes of inactivity.

Enabling Power saving mode makes RS-232 control of the display unavailable until the display is turned on using the power button on the front control panel.

Default input

OPS

HDMI1

HDMI2

HDMI3

VGA

Select a default input when the display is turned on.

OPS is enabled by default.

Use default touch settings

Enabled

Disabled

Sets the number of touch points.

Default is Enabled.

Select Enabled to use 10 touch points.

Select Disabled to use 20 touch points.

Power on RS232

Enabled

Disabled

When enabled, RS-232 can be used to turn on the display from low power state (soft off).

Default is Disabled.

HDMI [connector number]-EDID version

Default

EDID 1.4

EDID 2.0

Sets the HDMI-EDID version of the display’s active HDMI connector to Default, EDID 1.4, or EDID 2.0.

When Default is selected, the display automatically detects a connected device’s HDMI-EDID version and switches the display's HDMI connector between EDID 1.4 and 2.0. This feature might not work consistently for older or non-compliant EDID 1.4 devices.