Adjusting display and e³ experience settings
You can access the display and e³ experience’s settings using the Menu button on the front control panel or using the Settings icon in the launcher.
To exit the display’s settings
Tap Exit
OR
press the Menu button on the front control panel
Option | Values | Function | Notes |
---|---|---|---|
Ethernet | |||
Ethernet | Enable Disable | Enables or disables connecting to a network with the wired RJ45 jacks | Enabling Ethernet disables Wi-Fi. |
Get IP address automatically | Enable Disable | The display automatically acquires an IP address from a DHCP server on your network | Enabling Wi-Fi hotspot allows you to connect your mobile device to the display using Wi-Fi for screen sharing. |
Static IP address | Enable Disable | Enter a static IP address | Use the on-screen keyboard or connect a USB keyboard to the Display USB Type-A connector on the front connector panel to enter information. |
Wi-Fi | Enable Disable | Enables or disables connecting to a network wirelessly | Turn on Wi-Fi to discover networks. Enabling Wi-Fi disables Ethernet. |
Wi-Fi hotspot | Enable Disable | Enables or disables the Wi-Fi hotspot | The lock screen appears after the display wakes up from sleep. |
Set up Wi-Fi hotspot | [N/A] | Sets the network name, security, password and access point frequency | Use the on-screen keyboard or connect a USB keyboard to the Display USB Type-A connector on the front connector panel to enter information. |
Network status | [N/A] | Shows information about the display’s current network connection | [N/A] |
Option | Values | Function | Notes |
---|---|---|---|
Lock screen mode | |||
Lock screen mode | Enable Disable | Turns lock screen on or off | [N/A] |
Image | [N/A] | Select a custom image for the lock screen |
|
Disable | [N/A] | Turns off the custom image for the lock screen | [N/A] |
Lock screen password | Enable Disable | Set a PIN to unlock the lock screen | [N/A] |
Settings security | Enable Disable | Set a PIN to access certain settings | When Settings security is enabled, only Advanced and About settings are available. To access the other settings, tap the setting and enter the PIN. |
Option | Values | Function | Notes |
---|---|---|---|
Display | |||
HDMI out | 480p 1080p 4K | Select the output resolution | Ensure the device that receives the display’s HDMI out signal matches the selected output resolution. For best results, make sure all devices from source to sync, use the same resolution settings. |
Sleep | 15 minutes 30 minutes 45 minutes 60 minutes Always on | Sets the period of inactivity before the display’s screen turns off | This occurs when the e³ experience is selected as the input source. |
Automatically Set date and time | On Off | Sets the display’s date and time automatically | This is based on your region and time-zone settings. The display connects to network time servers on the Internet to accomplish this. |
Date | [N/A] | Sets the display’s date | Disable Automatically Set date and time to set the date manually. |
Date format | YYYY/MM/DD MM/DD/YYYY DD/MM/YYYY | Sets how the date appears | [N/A] |
Time | [N/A] | Sets the display’s time | Disable Automatically Set date and time to set the time manually. |
Time format | 12 hr 24 hr | Sets how the time appears | [N/A] |
Time zone | [N/A] | Sets the display’s time zone | [N/A] |
Language and input method | |||
Language | [Languages] | Sets the language for the display | [N/A] |
Input method | Sogou Keyboard Android keyboard (ASOP) [Simplified Chinese] | Sets the on-screen keyboard option | [N/A] |
Auto | [N/A] | Adjusts the display’s brightness automatically | The ambient light sensor can detect the room brightness and adjust the display’s screen brightness |
Manual | [N/A] | Sets the display’s brightness | Disable Auto to set the brightness manually |
Volume | [N/A] | Sets the display’s volume | [N/A] |
OTA | |||
OTA server | [OTA servers] | Sets which server the display connects to for updates Note The display must be connected to the Internet to check for system software updates. | Default is Auto. |
Automatically check for updates | Enable Disable | Enables or disables checking and downloading updates for the display’s firmware | Enabled by default. If this is disabled, manually check for updates in Update. |
Enable Disable | Enables or disables power saving mode | Enabled by default. When enabled, power saving mode activates after 90 minutes of inactivity. Enabling Power saving mode makes RS-232 control of the display unavailable until the display is turned on using the power button on the front control panel . | |
Default input | HDMI1 HDMI2 HDMI3 VGA SMART MX e³ | Select a default input when the display is turned on. | SMART MX e³ is enabled by default. |
Use default touch settings | Enabled Disabled | Sets the number of touch points. | Default is Enabled. Select Enabled to use 10 touch points. Select Disabled to use 20 touch points. |
Power on RS232 | Enabled Disabled | When enabled, RS-232 can be used to turn on the display from low power state (soft off). | Default is Disabled. |
Default EDID 1.4 EDID 2.0 | Sets the HDMI-EDID version of the display's active HDMI connector to Default, EDID 1.4 or EDID 2.0. Note Default is selected by default. | When Default is selected, the display automatically detects a connected device’s HDMI-EDID version and switches the display's HDMI connector between EDID 1.4 and 2.0. This feature might not work consistently for older or non-compliant EDID 1.4 devices. |
Option | Values | Function | Notes |
---|---|---|---|
Firmware version | [N/A] | Shows technical information about the display’s scalar firmware. | To see the e³ experience system software’s version use the About option (see About). |
[N/A] | Checks for updates to the system software | If an update is available, the text changes to Apply update now. Note The display must be connected to the Internet to check for system software updates. Check the display’s network settings. To check the network settings for SMART Board MX100 series interactive displays, see Network. |
Option | Values | Function | Notes |
---|---|---|---|
Restore user settings | [N/A] | Resets any options the user may have changed | [N/A] |
Restore factory settings | [N/A] | Resets all options to their default values | Only administrators should reset the display. |
Option | Values | Function | Notes |
---|---|---|---|
Name | [N/A] | Select a name for your display | [N/A] |
RAM | [N/A] | Shows how much RAM is installed in the display | This is working memory available to the e³ experience apps, such as the Whiteboard and Browser. |
Local storage | [N/A] | Shows how much storage memory is available and how much is currently in use | This is storage memory available to the e³ experience app like the whiteboard and browser. |
Resolution | [N/A] | Shows the display’s current screen resolution | [N/A] |
Android | [N/A] | Shows the current version of the Android operating system on the display | [N/A] |
[N/A] | Shows the current version of the display’s firmware and e³ experience | [N/A] | |
Touch kit | [N/A] | Shows the current version of the touch system firmware | [N/A] |
HDMI-out | [N/A] | Shows the current version of the HDMI-out system firmware | [N/A] |
MAC address | [N/A] | Shows the network’s MAC address | [N/A] |
Serial number | [N/A] | Shows the display’s serial number | [N/A] |
License | [N/A] | Shows third-party component licenses | [N/A] |
User agreement | [N/A] | Shows the SMART EULA | [N/A] |