SMART Board MX series firmware 2.0 release notes

May 1, 2020

2.0.6

• You can configure the HDMI version for each HDMI connector as either HDMI 1.4 or HDMI 2.0. This allows you to connect HDMI 1.4 devices that are incompatible with HDMI 2.0 connectors and would otherwise appear as DVI devices. While viewing an HDMI input, you can configure its HDMI version through the display settings (Settings > Advanced > HDMI EDID version).

• Touch performance is improved, especially when you’re writing quickly with a pen.

• Adjustments have been made to improve the display’s color representation and picture quality.

• The behavior of the automatic brightness control has been improved so that it adjusts the display’s brightness gradually when the room’s ambient brightness changes.

• An issue has been resolved that was causing Turkish content to appear when you set the display’s language to Vietnamese.

• An issue has been resolved that was causing no touch on an external computer when the display woke up.

January 13, 2020

2.0.3

• Buttons on the front convenience panel and remote control did not respond after an extended period of time

• The display didn’t respond to touch when waking up when the input was the iQ experience

• Resolved networking issues related to discovery advertisements with SSDP

• When the display woke up, the mute icon appeared even though the audio was not muted

• The display may flicker when switching to the RGB input as the display determines the video source’s resolution.

• The display’s screen may flicker when switching to the Intel Compute Card or iQ using the room control system. The flickering resolves by itself.

• The Intel Compute Card doesn’t appear in the Input selection menu.

  The AM50 iQ appliance may have been installed after the display was turned on for the first time. Restore the display’s factory settings.

  SeeRecovery

  Note 

  Restoring factory settings resets all options to their default values.

October 3, 2019

2.0.1

• Improved touch accuracy near the edge of the screen when a computer is connected to the SMART Board MX265 or MX365 interactive display.

• A video’s audio is no longer out of sync when playing the video.

• The display may flicker when switching to the RGB input as the display determines the video source’s resolution.

• The display’s screen may flicker when switching to the Intel Compute Card or iQ using the room control system. The flickering resolves by itself.

• The Intel Compute Card doesn’t appear in the Input selection menu.

  The AM50 iQ appliance may have been installed after the display was turned on for the first time. Restore the display’s factory settings.

  SeeRecovery

  Note 

  Restoring factory settings resets all options to their default values.