Orienting the interactive pen display

Orient the interactive display after you connect it to your computer and any time the location of your pen touch is misinterpreted (ink appears a distance from the actual pen contact).

To orient the interactive pen display

1. In Windows operating systems, tap the SMART Board icon ( or ) in the notification area, then select Orient.

   OR

   In OS X operating system software, tap the SMART Board icon in the Mac menu bar, then select Orient.

   Targets appear on the screen.

   Note 

   If the interactive pen display is your secondary monitor, you may need to press the SPACE BAR to move the orientation screen to the interactive pen display.

2. Use the cordless pen to press the center of the target.

   Tips 

   • To accurately orient the screen, press the cordless pen to the screen near the first target. The color of the target turns to green. Slide the cordless pen to the center of the target. Briefly hold the cordless pen to the center of the target before removing the cordless pen from the screen. Repeat for each target that appears.

   • You can orient a target again by pressing the LEFT ARROW key on your keyboard.

   • Press the ESC key if you want to close the orientation screen before you finish orientation. Otherwise, the orientation screen closes after you press the last target.

3. Lift the pen from the surface of the interactive pen display.

   Note 

   The computer registers the point on the screen where you remove your pen from the display surface.

   The target moves to the next orientation point.

4. Repeat steps 2 to 3 until you press all targets.

   The orientation window closes.