Getting ready to install the interactive pen display

Before you use the interactive pen display, make sure you determine the best location, work area, and angle for the display.

Install the interactive pen display in a cool, dry place without excessive levels of dust, humidity and smoke. Operate the interactive pen display in an environment within a temperature range of 41°F to 95°F (5°C to 35°C) and within a humidity range of 20% to 80% (non-condensing).

  • Install the interactive pen display in a cool, dry place without excessive levels of dust, humidity and smoke.

  • Operate the interactive pen display in an environment within a temperature range of 41°F to 95°F (5°C to 35°C) and within a humidity range of 20% to 80% (non-condensing).

To prevent the interactive pen display from overheating, do not block or cover any of the ventilation holes on the top of the unit. Make sure there is adequate airflow around the display and maintain an air gap of at least 4" (0.1 m) on all sides. Avoid putting the display close to other electronic equipment that also generates heat.

You must install SMART Product Drivers on the computer connected to the interactive pen display to enable the display’s surface to respond to the touch by the cordless pen or your finger. Use your computer’s mouse and keyboard to install SMART Product Drivers before you install the interactive pen display. The interactive pen display cannot provide keyboard or cordless pen functionality until you install SMART Product Drivers.

Organize your work area so you can work comfortably. Position the interactive pen display and your keyboard for easy access without unnecessary reaching.

You can also mount the interactive pen display on an articulated arm or other third-party stands meeting the VESA 200 × 100 specification for display stands.

You can recline the Smooth Tilt Stand to change the angle and height of the interactive pen display. To alleviate glare, you can use the attached Smooth Tilt Stand to change the display’s angle.

SeeRemoving and installing the Smooth Tilt Stand

To change the interactive pen display’s angle

  1. Grab the top of the interactive pen display and pull up on the lever at the top of the stand.

  2. Push the interactive pen display down or up to adjust the angle of the display.

  3. Release the lever to lock the stand in place.

You can remove the interactive pen display from its stand.

Caution 

  • Before beginning, set down the interactive pen display carefully to ensure you do not damage the buttons. Use a soft cloth or similar item to protect the display’s interactive surface.

  • Do not place the interactive pen display on a surface that can mark, scratch or damage the screen.

  • The display’s ventilation holes must remain at the top of the interactive pen display while it is being used. Do not attempt to install the Smooth Tilt Stand in a position that is different from the standard orientation.

To remove the Smooth Tilt Stand

  1. Place the interactive pen display face down on a flat surface.

  2. Remove the four screws that attach the stand to the VESA mount on the back of the interactive pen display.

  3. Remove the stand.

To reinstall the Smooth Tilt Stand

  1. Place the interactive pen display face down on a flat surface.

  2. Place the stand on the back of the display with the lever toward the top of the display.

  3. Align the four holes in the stand with the mounting holes in the back of the interactive pen display.

    Tip 

    Additional mounting holes are provided for installing a VESA mount on the back of the interactive pen display.

  4. Insert and tighten the four screws to secure the stand to the interactive pen display.

Related documents