Connecting the interactive pen display to other devices

You can connect another display device, such as a projector or a monitor, directly to the interactive pen display. The image from the interactive pen display also appears on the other display. When you connect a projector or a monitor, the video signal from the computer is automatically sent to the projector or monitor.

Note 

The display resolution of the connected computer must be set to a resolution supported by a secondary display device.

To connect a projector or monitor

  1. To connect a projector or monitor to the interactive pen display, connect a video cable from the display’s video out connector to the second display’s video in connector.

  2. Notes 

    • The interactive pen display does not perform any analog-to-digital or digital-to-analog conversion on video signals. It strictly maintains the input signal format on output.

      For details about your other device’s connectors, read the instructions that came with your device.

    • If you use a video cable longer than 23' (7 m), you must boost the video signal with a video distribution amplifier.

      SeeVideo cable extenders for information about extending video cables.

    • If you want to show HDCP content, use a video distribution amplifier that is HDCP 1.4 compliant.

Related documents