SMART kapp 84 specifications
The SMART kapp 84 board enables you to collaborate with others in a simple but powerful way. Write and draw on the board like you would a regular dry erase board. You can then connect a Bluetooth-enabled mobile device to the board by scanning a Quick Response (QR) code or by tapping the Near Field Communication (NFC) tag. When you first connect your mobile device, you’re directed to the Apple App Store or Google Play to download the SMART kapp app. After you download and install the app, you can use it to connect to your board and share content with others.
Dimensions and weightsDimensions
Weight
57 lb. (25.9 kg)
Shipping dimensions
77" × 56" × 6 1/2" (195.6 cm × 142.2 cm × 16.5 cm)
Shipping weight
60 lb. (27.2 kg)
Parts and featuresIncluded parts | SMART kapp 84 board Dry erase marker (×6) Eraser Brackets and hardware for mounting the board to a wall Power supply with international plugs |
Digital capture technology | DViT (Digital Vision Touch) technology |
Wireless technology | Bluetooth 4.0 Dual Mode (backwards compatible with Bluetooth 2.1 + EDR) |
Capture options | Establish a Bluetooth wireless connection with a supported mobile device (see below) by doing one of the following:
Connect a USB drive |
USB drive support | USB 2.0 Type-A receptacle (support for FAT-formatted USB drives only) |
User support | Supports two users drawing at the same time |
Frame finish | Bright White |
Mobile device supportApple devices | iOS 8.1 or later operating system software 50 MB of storage iPhone 4S or later Third generation iPad or later First generation iPad mini or later Fifth generation iPod touch or later |
Android devices | Android 4.4.4 (KitKat) or later operating system 50 MB of storage (internal or SD card) 1024 MB of RAM 720p or better screen resolution Bluetooth 2.1 + EDR NFC (recommended) 3 megapixel or better rear-facing camera (recommended) |
Supported browsersMobile devices | Safari for iOS 8.1 or later operating system software Chrome for Android 39.0.2171.93 or later |
Desktop | Internet Explorer 10 or later Chrome 39.0.2171.95 or later Firefox 34.0.5 or later Safari 8.0 or later |
MountingOptions | Included mounting bracket Standard VESA 600 mm × 400 mm mounting bracket (not included) |
Recommended height | 76" (193 cm) from the floor to the middle of the included mounting bracket |
Bolt requirements for VESA mounting bracket | |
Size | M6 |
| To avoid damage to the board, ensure the bolt is no longer than 1/2" (1.2 cm) plus the width of the washer (a) and the width of the bracket (b)
|
Maximum length
PowerPower requirements | 100 V to 240 V AC, 50Hz to 60Hz |
Power consumption at 77°F (25°C) | 15 W (maximum) |
Power cable | 7' 10 1/2" (2.4 m) power cable |
Storage and operating requirementsStorage | |
Temperature | -40–140°F (-40–60°C) |
Humidity | 5–95% relative humidity, non-condensing |
Operating | |
Temperature | 41–95°F (5–35°C) |
Humidity | 10–80% relative humidity, non-condensing |
Certification and complianceRegulatory certification | CE, ETL, FCC |
Environmental compliance | |
European Union | REACH, RoHS, WEEE and Packaging |
U.S. | Packaging and Conflict Minerals |
Purchasing informationOrder numbers | |
KAPP84 | SMART kapp 84 board |
Warranty | |
North America and the rest of the world | One-year limited equipment warranty |
EMEA | Two-year limited equipment warranty |
Extended warranties | |
EWY1-KAPP84 | One-year extended warranty |
EWY2-KAPP84 | Two-year extended warranty |
Replacement parts | Replacement markers, power supply, mounting hardware and erasers can be purchased from the Store for SMART Parts (see smarttech.com/Support/PartsStore). |
Models |
|
Keywords |
|
Related documents |