SMART kapp 42 specifications

The SMART kapp 42 board enables you to collaborate with others in a simple but powerful way. Write and draw on the board like you would a regular dry erase board. You can then connect a Bluetooth-enabled mobile device to the board by scanning a Quick Response (QR) code or by tapping the Near Field Communication (NFC) tag. When you first connect your mobile device, you’re directed to the Apple App Store or Google Play to download the SMART kapp app. After you download and install the app, you can use it to connect to your board and share content with others.

 

Dimensions

Weight

35 lb. (16 kg)

Shipping dimensions

One unit on a pallet
47 1/4" × 25" × 5 3/8" (119.9 cm × 63.5 cm × 13.6 cm)

Shipping weight

One unit on a pallet
47 lb. (21.3 kg)

Seven units on a pallet
270 lb. (122.5 kg)

Included parts

SMART kapp 42 board

Dry erase marker (×3)

Eraser

Brackets and hardware for mounting the board to a wall

Power supply with international plugs

Digital capture technology

DViT (Digital Vision Touch) technology

Wireless technology

Bluetooth 4.0 Dual Mode (backwards compatible with Bluetooth 2.1 + EDR)

Capture options

Establish a Bluetooth wireless connection with a supported mobile device (see below) by doing one of the following:

  • Scan the board’s unique QR code

  • Tap the board’s NFC tag (Android devices only)

Connect a USB drive

USB drive support

USB 2.0 Type-A receptacle (support for FAT-formatted USB drives only)

Frame finish

Bright White

Apple devices

iOS 8.1 operating system software

50 MB of storage

iPhone 4S or later

Third generation iPad or later

First generation iPad mini or later

Fifth generation iPod touch or later

Android devices

Android 4.4.4 (KitKat) operating system

50 MB of storage (internal or SD card)

1024 MB of RAM

720p or better screen resolution

Bluetooth 2.1 + EDR

NFC (recommended)

3 megapixel or better rear-facing camera (recommended)

Mobile devices

Safari for iOS 8.1 or later operating system software

Chrome for Android 39.0.2171.93 or later

Desktop

Internet Explorer 10 or later

Chrome 39.0.2171.95 or later

Firefox 34.0.5 or later

Safari 8.0 or later

Options

Included mounting bracket

Standard VESA 400 mm × 400 mm mounting bracket (not included)

Recommended height

69" (175.3 cm) from the floor to the middle of the included mounting bracket

Bolt requirements for VESA mounting bracket

Size

M6

Maximum length

To avoid damage to the board, ensure the bolt is no longer than 5/16" (8 mm) plus the width of the washer (a) and the width of the bracket (b)

Power requirements

100 V to 240 V AC, 50Hz to 60Hz

Power consumption at 77°F (25°C)

10 W (maximum)

Power cable

7' 10 1/2" (2.4 m) power cable

Storage

Temperature

-40–140°F (-40–60°C)

Humidity

5–95% relative humidity, non-condensing

Operating

Temperature

41–95°F (5–35°C)

Humidity

10–80% relative humidity, non-condensing

Regulatory certification

CE, ETL, C-Tick, FCC

Environmental compliance

European Union

REACH, RoHS, WEEE and Packaging

U.S.

Packaging and Conflict Minerals

Order numbers

KAPP42

SMART kapp 42 board

Warranty

North America and the rest of the world

One-year limited equipment warranty

EMEA

Two-year limited equipment warranty

Extended warranties

EWY1-KAPP42

One-year extended warranty

EWY2-KAPP42

Two-year extended warranty

Replacement parts

Replacement markers, power supply, mounting hardware and erasers can be purchased from the Store for SMART Parts (see smarttech.com/Support/PartsStore).

Related documents