Indicators and controls
Your SMART Board 600 or D600 series interactive whiteboard has the following indicators and controls:
Pen tray buttons, LEDs and sensors
SeePen tray buttons
A Ready light
SeeThe ready light
The controller module’s Reset button
In addition to providing a convenient place to hold the pens and the eraser, the pen tray has several controls, sensors and indicators.
In the center of the pen tray, there are three buttons. The two large rectangular buttons default to keyboard (left button) and right-click (right button) functions.
You can customize the buttons using SMART Product Drivers to provide several other functions, including printing, changing pages and capturing the screen. Pressing both buttons simultaneously starts the orientation process.
The third small, round button launches the online Help, where you’ll also find an alignment icon for orienting your interactive whiteboard.
When you turn on or reset your interactive whiteboard, the indicator lights on the pen tray cycle twice. When the system is running, the lights come on only when you remove a tool. Only one illuminates at a time, indicating the last tool removed from the pen tray. The pen tray detects the removal of the pens and the eraser using reflective infrared sensors similar to the ones that detect the presence of paper in photocopiers.
Note
The pen tray tools must reflect infrared light. Old-style black SMART Board interactive whiteboard pens might not reflect infrared light reliably.
If the infrared sensors in the bottom of your pen tray’s recesses become obstructed by dirt, the sensors don’t detect when you remove a pen or the eraser. The recessed LED doesn’t illuminate, and the lifted tool doesn’t work.
To clean a sensor, moisten a cotton swab with a household glass cleaner, such as Windex, and then carefully clean the infrared transmitter and receiver.
You can see the Ready light in the lower-right corner of your interactive whiteboard’s frame. The Ready light indicates the controller module’s operating states.
The following table shows the Ready light’s normal states.
Ready light state | Meaning |
---|---|
Solid red | Your interactive whiteboard is receiving power from the USB cable or an optional expansion module’s power adapter, but your interactive whiteboard isn’t communicating with a computer. |
Solid green | Your interactive whiteboard is receiving power and is communicating successfully with SMART Product Drivers. |
Flashing green | Your interactive whiteboard is receiving power and is communicating successfully with the USB HID driver of your computer’s operating system. Note In HID mode, interactive whiteboard tools such as the pens and the eraser don’t work, but you can move the mouse pointer and perform mouse functions by touching the interactive screen. The Right-Click button on the pen tray might work, depending on the version of Windows operating system you’re using. Neither the Keyboard nor the Help button will work. |
Flashing or solid amber | The controller module is in a service mode or has detected a software error. |