Using the remote control

The display comes with an infrared remote control.

Use the infrared remote control to turn the display on or off, switch inputs, control the volume, access the display’s iQ apps, and more. You can also use the remote control to open the on-screen menus and change the display’s settings.

Important 

  • Do not subject the remote control to strong shock.

  • Keep the remote control away from liquids. If it gets wet, wipe it dry immediately.

  • Do not expose the remote control to heat or steam.

  • Do not open any part of the remote control other than the battery compartment.

This image and table describe the remote control’s functions.

No.

Name

Procedure

1 

Power

  • Press to turn the display on or off.

    Note 

    Be aware that touch is not available immediately after waking or turning on the display. Wait a few seconds, and then the display will respond to touch.

  • Press and hold for five seconds to open the power menu, from which you can turn off or restart the display.

    Press to wake the display or put it back to sleep.

2 

Home

Open the iQ Home screen.

SeeUsing the Home button

3 

Up and down buttons

Select a menu option in the settings.

4 

OK

Open the currently selected menu option or accept the currently selected value.

5 

Left and right buttons

Change the value of the selected setting.

6 

Back

Go one step back in the navigation history.

7 

Input

Switch inputs.

SeeConnecting room computers and guest laptops

8 

Settings

Open display settings.

9 

 Screen shade

Hide screen contents behind a screen shade.

SeeShowing and hiding the screen shade

10 

 Freeze frame

Freeze and unfreeze the screen.

SeeFreezing the screen

11 

Volume increase

Increase the volume.

SeeAdjusting the volume

12 

Volume decrease

Decrease the volume.

SeeAdjusting the volume

13 

Microphone array mute

Mute the microphone.

SeeUsing the microphone array

14 

 Share screen

Open the Screen Share app.

SeeSharing your device’s screen to the display