Updating iQ Pro system software

When the display is connected to the internet, it automatically downloads software or firmware updates in the background, then waits for four hours of inactivity. When that happens, the display shows a two‑minute countdown before the update begins. You can interrupt the countdown at any time. During the update, the display’s screen is blank for several minutes. When the update is complete, the iQ home screen (or input lobby) appears.

Note 

You can configure your organization’s network to allow or prevent automatic system software and firmware updates.

SeeConnecting to a network

If the display has downloaded the system software update but hasn’t yet applied the update, you can start the update process manually from Settings.

To apply a system software update manually

  1. In Settings, scroll to Software Update.

  2. Under Check for Updates Now, tap Apply Update Now.

    The display turns off and then turns back on. The display then applies the update.

You can also download system software updates at smarttech.com/downloads and update your display using a USB drive.

Note 

Instructions for downloading and installing system software updates are provided on the software downloads page.