Installing the display
SMART recommends that only trained installers install SMART Board interactive displays.
Warning
Improper installation of a display can result in injury and product damage.
Caution
Avoid setting up and using the display in an area with excessive levels of dust, humidity, or smoke.
Make sure an electrical socket is near the display and remains easily accessible during use.
The display should be used only with European TN and TT power distribution systems.
It is not suitable for older, IT-type power distribution systems found in some European countries. This system (IT-type) is widely used isolated from earth, in some installations in France, with impedance to earth, at 230/400V, and in Norway, with voltage limiter, neutral not distributed, at 230V line-to-line.
Contact qualified personnel if you’re uncertain of the type of power system available where you’re installing the display.
Important
There are critical software updates for the display that you need to install to ensure the display is fully functional and provides the best experience. Connect the display to a network with internet access to automatically download and apply these updates as well as future updates.
Refer to the display’s specifications for its normal operating power requirements, additional requirements, and other information.
Refer to the illustrated installation instructions included with the display for specific information about installing it. If you’ve misplaced these instructions, they’re also available online.