Turning on and turning off the display

In most situations, the display enters an energy saving mode when not in use.

In some situations, such as when you transport the display or clean its screen, you need to turn the display off. You can turn it back on after.

You can also restart the display.

See alsoConnecting power and turning on the display for the first time

To wake the display, press the Power buttonPower on the front control panel or remote control.

To return the display to a partial sleeping state, press the Power buttonPower on the front control panel or remote control.

Note 

Touch is not available immediately after waking or turning on the display. Wait a few seconds, and then the display will respond to touch.

To turn the display off

  1. Press the Power buttonPower on the front control panel or the remote control for five seconds.

    The power menu appears.

  2. Tap Power off.

  3. Flick the switch beside the AC power inlet to the OFF (O) position.

    Note 

    Wait at least 30 seconds before turning the display back on.

  1. Press the Power buttonPower on the front control panel or the remote control for five seconds.

    A slider appears on the screen.

  2. Move the slider to the right.

  3. Flick the switch beside the AC power inlet to the OFF (O) position.

    Note 

    Wait at least 30 seconds before turning the display back on.

  1. Press the Power buttonPower on the front control panel for two seconds.

To turn the display back on

Note 

Touch is not available immediately after waking or turning on the display. Wait a few seconds, and then the display will respond to touch.

  1. Flick the switch beside the AC power inlet to the ON (I) position.

  2. Press the Power buttonPower on the front control panel or the remote control.

  1. Press the Power buttonPower on the front control panel.

  1. Press the Power buttonPower on the front control panel or the remote control for five seconds.

    The power menu appears.

  2. Tap Restart.

  1. Press and hold the Power buttonPower on the front control panel or the remote control for 10 seconds.

    The display restarts.

  1. Flick the switch to the OFF (O) position.

  2. Flick the switch to the ON (|) position.

    The display and iQ appliance restart.