Updating iQ system software

When the display is connected to the internet, it updates its system software automatically.

When a system software update is available, the display downloads the update in the background then waits for four hours of inactivity. When that happens, the display shows a two‑minute countdown before beginning the update. The countdown can be interrupted at any time. The update begins when the countdown finishes. The display shows a blank screen for four minutes. When the update is complete, the display shows the Home screen.

When the update is installing, touch, the front control panel, and the remote control will not respond.

See alsoUpdating the display’s firmware

Note 

You can configure your organization’s network to allow or prevent automatic system software updates.

SeeConnecting to a network

If the display has downloaded the system software update but hasn’t yet applied the update, you can start the update process manually from Settings.

To apply an automatic iQ system software update manually

  1. From the Home screen, tap Settings.

  2. Scroll to Auto Update.

  3. Under Check for Updates Now, tap Apply Update Now.

You can download system software updates at smarttech.com/downloads and update your display using a USB drive.

Related documents