Accessories
A variety of accessories are available for the display:
OPS appliances
SMART Ultra HD Camera
Stands
USB extenders
See alsosmarttech.com/accessories

The display includes an OPS accessory slot in which your organization can install a SMART OPS PC module.
Caution
Only SMART-provided OPS appliances are supported in SMART Board interactive displays. Third-party OPS appliances are not supported, and their use can lead to poor performance or damage to the display.
Do not install or remove the OPS appliance while the display is turned on. First make sure the power switch on the back of the display beside the AC power inlet is in the OFF (O) position. If you can’t reach the power switch, use the front control panel’s power button
to put the display in Standby mode, and then unplug the display’s power cable from the power outlet.
After you have turned the display’s power switch off or unplugged it, wait at least 30 seconds before removing the appliance to allow its internal power supplies to discharge completely. You might also wait five minutes to give the appliance the opportunity to cool, if necessary.
Make sure the OPS appliance is secured to the display with screws through the two anchor points. Inadequately secured appliances can damage the display. (An OPS appliance’s anchoring screws are typically captive, although some simply include separate anchoring screws.)
SeeOPS appliances

The SMART Ultra HD Camera is a 4K Ultra-HD camera with ePTZ (electronic pan-tilt-zoom). You can mount the camera on the top of the display and use it to participate in video calls, capture photos and videos, and more. You can also connect a room computer or guest laptop to the display and use the SMART Ultra HD Camera in place of the connected computer’s camera.

If you want to move the display from place to place, you can install it on a SMART mobile stand. If you are installing the display on a wall that cannot support the display’s full weight, you can install the display on a SMART floor stand.

Use the USB-XT extender if you need a USB connection longer than the maximum length in the USB specifications.
SeeUSB-XT extender specifications (docs.smarttech.com/kb/119318)
See alsoExtending USB cables