Connecting to a network
The display requires a network and internet connection for downloading software and firmware updates.
Configuring network settingsNetwork administrators need to configure the display’s network connection to enable over-the-air system firmware updates for a number of the embedded apps.
Note
A 5 GHz wireless or Ethernet network connection may provide a better experience with the EShare app.
To configure the network
Open the required TCP/UDP ports:
Protocol Port range Feature TCP 80 System software update TCP 56789 EShare app TCP 25123 EShare app TCP 8121 EShare app TCP 8000 EShare app TCP 8001 EShare app TCP 48689 EShare app TCP 25123 EShare app Add the following URLs to the to the network allowlist:
URL Feature h1.ee-share.com EShare app worldota.syrjb.com:9900 System software update sw.syrjb.com:8081 Whiteboard sharing Configure the network to enable broadcast service.
Configure the network to allow mDNS (multicast).
Connecting to a network
The display requires a network and internet connection for downloading software and firmware updates. You can connect to a network using Wi‑Fi or one of the RJ45 Ethernet jacks.
Important
Do not use the RJ45 jack on an OPS PC to connect to a network.
Note
The network display’s connection is shared internally with an OPS PC.
Tip
If you’re using one of the display’s RJ45 jacks to connect to an Ethernet network, you can connect the other jack to a computer to provide network access for the computer. This is particularly useful if there is only one wired network connection in the room. (Network access is available when the display is on or in Standby mode but not when it’s in Power Save mode).
Configuring network settingsNetwork administrators need to configure the display’s network connection to enable over-the-air firmware updates for a number of the embedded apps.
To configure the network
Open the required TCP/UDP ports:
Protocol Port range Feature TCP 80 System software update TCP
2067
Screen Share app
TCP
5000
AirPlay
TCP
7000
AirPlay
TCP
7236
Miracast
TCP
7382
CRCP
TCP
7385
Screen Share app
TCP
7385–7405
CRCP
TCP
8008
Websocket
TCP
8009
Chromecast
TCP
29736
Screen Share app
TCP
39458
Screen Share app
TCP 49200–49250 Screen Share app
TCP
49200–49420
AirPlay video
UDP
5353
MDNS/Bonjour
UDP
7236
Miracast
UDP
7385–7397
CRCP audio and touchback
UDP
21200
RTP /RTCP
UDP
21201
RTP/RTCP
UDP
49220–49420
AirPlay audio
UDP
49300–49350
Screen Share app
UDP
49400–49450
RTP/RTCP
Add the following URLs to the to the network allowlist:
URL Feature https://share.bytello.com Screen Share app https://ssp.bytello.com/download
Screen Share app
Configure the network to enable broadcast service.
Configure the network to allow mDNS (multicast).
Connecting to a network
The display requires a network and internet connection for downloading software and firmware updates. You can connect to a network using Wi‑Fi or one of the RJ45 Ethernet jacks.
Important
Do not use the RJ45 jack on an OPS PC to connect to a network.
Note
The display’s network connection is shared internally with an OPS PC.
Tip
If you’re using one of the display’s RJ45 jacks to connect to an Ethernet network, you can connect the other jack to a computer to provide network access for the computer. This is particularly useful if there is only one wired network connection in the room. (Network access is available when the display is on, but not when it’s in Standby mode).