Accessories

Accessories for the display include:

  • SMART OPS PC module

  • SMART wall mount (WM-SBID-200) for SMART Board displays

  • Stands

  • USB extenders

See also  smarttech.com/accessories

SMART PCM8 series OPS PC

SMART Open Pluggable Specification (OPS) PC modules provide a hassle-free Windows Pro installation based on Intel Core processors and are designed specifically to work with a SMART Board interactive display. All OPS PC modules are fully licensed with Windows Pro. Install the OPS PC module in a display’s accessory slot to provide a complete 4K UHD Windows installation at your fingertips, without the need for an external PC or additional cables.

Install familiar Windows applications, such as SMART Notebook, SMART TeamWorks, and SMART Meeting Pro software, and access the internet directly through your display’s network connection. Upgrades and service for the OPS PC module are easy to perform without removing the display from its mounting.

If you want to move the display from place to place, you can install it on a SMART mobile stand. If you are installing the display on a wall that cannot support the display’s full weight, you can install the display on a SMART floor stand.

See  Stands and wall mounts

Notes 

  • If you want to use the 86" model (SBID-GX186-V2) with one of SMART’s electric height-adjustable stands, you must first attach a SMART wall mount (model WM-SBID-200, part #1031766, docs.smarttech.com/kb/171405) to the display before mounting the display to the stand. (This applies to the FSE-400, FSE-410, and FSE-420 models of mobile stand and the WSE-400 and WSE-410 models of wall stand).

  • For users in Australia and New Zealand: SMART does not provide stands for use in Australia and New Zealand, nor can we provide recommendations for stands from other vendors.

Notes 

  • If you want to use the 75" and 86" models (GX175-V3 and GX186-V3) with one of SMART’s electric height-adjustable stands, you must first attach a SMART wall mount (model WM-SBID-200, part #1031766, docs.smarttech.com/kb/171405) to the display before mounting the display to the stand. (This applies to the FSE-400, FSE-410, and FSE-420 models of mobile stand and the WSE-400 and WSE-410 models of wall stand).

  • For users in Australia and New Zealand: SMART does not provide stands for use in Australia and New Zealand, nor can we provide recommendations for stands from other vendors.

As noted in the display’s specifications, the USB connection between the display and computer should be no longer than 16' (5 m). If you need to connect a computer that is more than 16' (5 m) from the display, use the following USB extender:

Extender

Specifications

USB-XT

docs.smarttech.com/kb/119318

See also  Extending USB cables

Related documents