Installing the display
SMART recommends that only trained installers install SMART Board interactive displays.
Warning
Improper installation of a display can result in injury and product damage.
Caution
Avoid setting up and using the display in an area with excessive levels of dust, humidity, or smoke.
Make sure an electrical socket is near the display and remains easily accessible during use.
The display should be used only with European TN and TT power distribution systems.
It is not suitable for older, IT-type power distribution systems found in some European countries. This system (IT-type) is widely used isolated from earth, in some installations in France, with impedance to earth, at 230/400V, and in Norway, with voltage limiter, neutral not distributed, at 230V line-to-line.
Contact qualified personnel if you’re uncertain of the type of power system available where you’re installing the display.
Important
Refer to the display’s specifications for its normal operating power requirements, additional requirements, and other information.
Refer to the illustrated installation instructions included with the display for specific information about installing it. If you’ve misplaced these instructions, they’re also available online.