Using the front control panel

The front control panel contains the Standby, Input Select, Mute and volume control buttons.

Front control panel

No.

Name

Procedure

1

Standby

  • Press to exit Standby mode.

  • Press twice to enter Standby mode.

  • Press and hold to reset the interactive flat panel.

2

Select

  • Press to switch inputs.

3

 Mute

  • Press to mute or unmute the volume.

  • Press and hold to freeze and unfreeze the screen (see Freezing the screen).

4

Decrease

  • Press to decrease the volume.

5

Increase

  • Press to increase the volume.

Important 

If there is a film over the front control panel, remove it before using the front control panel.

In normal operation, all buttons are white.

The Standby button also functions as an indicator light:

Indicator light

Status

Procedure

Solid white

Normal operation

  • [N/A]

Off

Not receiving power

  • Confirm the interactive flat panel’s power cable is connected to the power outlet.

  • Flick the switch beside the AC power inlet to the ON (I) position.

Solid amber

DPMS (power management) mode

  • Press the Standby button to exit DPMS mode.

  • Connect an input source.

Slowly flashing amber

Standby mode

  • Press the Standby button to exit Standby mode.

  • If presence detection is enabled, move in range of the presence detection sensor.

  • If Wake to Touch is enabled, touch the screen.

Flashing amber

No USB connection from the connected computer

Slowly flashing white

SMART Board service not running on the connected computer

  • Ensure that SMART Product Drivers is installed and that the SMART Board service is running.

If you’re presenting content with sound, you can use the buttons on the front control panel to increase, decrease, mute and unmute the volume (see Front control panel).

You can temporarily freeze the screen by pressing and holding the Mute button on the front control panel (see Front control panel). This is particularly useful when you want to pause a video, an animation or other moving content.

Notes 

  • Some older models might not support screen freezing.

  • Freezing the screen does not pause any applications running on the connected computer. It simply freezes the interactive flat panel of those applications.

To unfreeze the screen, press and hold the Mute button again.

Related documents