SMART Board 8065i-G5-SMP-V2 specifications
The SMART Board 8065i‑G5‑SMP‑V2 interactive flat panel combines SMART’s proprietary DViT (Digital Vision Touch) technology with the premium touch experience of SMART Meeting Pro software.
The 65" 4K ultra-high-definition LED display provides optimal image clarity and wide viewing angles. With the Pen ID feature, you can assign different appearances to the two pens and write or draw over any application in digital ink.
Object awareness allows you to perform mouse functions with your finger, write in digital ink with the pen, and erase with your palm or eraser—all without switching tools or modes. You can use a variety of gestures in applications, and two users can write or draw at the same time.
As an ENERGY STAR certified signage display, the SMART Board 8065i‑G5‑SMP‑V2 interactive flat panel meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and Department of Energy. |
Dimensions
Weight
134 lb. (60.9 kg)
Shipping dimensions (including pallet)
69 1/4" × 49 5/8" × 11 7/8" (175.8 cm × 126.1 cm × 30.3 cm)
Shipping weight
181 lb. (82.1 kg)
Note
Project
CMN_Master_EN-US
Last updated
July 31, 2024
Last edited
N/A
Interaction | |
---|---|
Touch technology | DViT technology |
Multitouch capabilities | 8 touches 1 |
Object awareness | Behavior adjusts automatically to the tool or object you’re using, whether it’s a pen, finger, eraser or palm. |
Pen ID | Two people can write independently and simultaneously, using different colored ink. |
Display | |
Type | LED |
Aspect ratio | 16:9 |
Optimal resolution | 3840 × 2160 at 30 Hz (HDMI) or 60 Hz (DisplayPort) |
Horizontal frequency | 26.97–75.0 kHz |
Vertical frequency | 23.9–60.32 Hz |
Contrast ratio (typical) | 1200:1 |
Brightness (maximum) | 338 cd/m² |
Pixel dimensions | 0.372 mm × 0.372 mm |
Gamut | 68% of NTSC |
Viewing angle | 178° |
Response time (typical) | 8 ms |
Presence detection | Presence detection sensor on the bottom frame |
Audio | 10 W rear-facing integrated speakers (×2) |
Noise level | <35 dBA |
Included cables and accessories | 8' (2.4 m) country-specific power cable 16' 5" (5 m) USB cable 20' 8" (6.3 m) HDMI cable CAT 5 USB extender Pen (×2) |
Mounting holes | For a standard VESA 300 mm × 400 mm mounting plate Lower mounting holes 13 3/4" (35 cm) from the bottom of the interactive flat panel |
Mounting bracket depth | Minimum depth of 1 5/8" (4.2 cm) for all components on the back of the interactive flat panel to clear the wall |
Connector panel | OPS slot HDMI1 input connectors HDMI2 input connectors DisplayPort input connectors Stereo 3.5 mm out RS-232 in | |
---|---|---|
Bottom | USB 2.0 Type-A | |
Back | AC power inlet |
Interactive flat panel | See the SMART Board 8000i‑G5‑SMP series interactive flat panels administrator’s guide (docs.smarttech.com/kb/170814) |
---|---|
Room computers and guest laptops | |
General requirements | |
4K UHD | Graphics card that can support 3840 × 2160 resolution at 30 Hz and that has 1 GB DDR 5 memory See Minimum requirements for Ultra High Definition or 4K on your interactive flat panel |
Mini-computers | |
General requirements | |
Dimensions | Smaller than 10" × 10" × 2" (25.4 cm × 25.4 cm × 5.1 cm) |
Weight | Less than 10 lb. (4.5 kg) |
Mounting | VESA 75 mm × 75 mm or 100 mm × 100 mm mounting pattern |
HDMI | Maximum length: 23' (7 m) Notes
|
---|---|
DisplayPort | DisplayPort 1.2 compliant or better Maximum length: 23' (7 m) |
USB | Maximum length: 16' (5 m) |
Important | Using cables that exceed these maximum lengths can produce unexpected results, such as degraded picture quality or USB connectivity. Refer to SMART installation standards (docs.smarttech.com/kb/171035) for comprehensive information about cables and extensions for SMART hardware products. |
Power requirements | 100V to 240V AC, 50 Hz to 60 Hz |
---|---|
Power consumption at 77°F (25°C) | |
Standby mode | <2.2 W |
Normal operating (out‑of‑box) | 110 W |
Maximum operating (with accessories) | 189 W |
Operating temperature | 41–95°F (5–35°C) |
Storage temperature | -4–140°F (-20–60°C) |
Humidity | 5–80% relative humidity, non-condensing |
Regulatory certification | UL (U.S./Canada), FCC, IC, CE, CCC, EAC, RCM, KC, SPRING, PSE |
---|---|
Environmental compliance | |
European Union | REACH, RoHS, WEEE and Packaging |
U.S. | Packaging and Conflict Minerals |
Order number | |
---|---|
SBID8065i-G5‑SMP‑V2 | SMART Board 8065i-G5-SMP‑V2 interactive flat panel, including a SMART Meeting Pro software room license and 25 SMART Meeting Pro software personal licenses |
Optional accessories | |
UGK-KAPPIQ-AM30-ENT | SMART kapp iQ for business appliance for SMART Board 8000i‑G5 series interactive flat panels |
WM-SBID-501 | Fixed wall mount for SMART Board interactive displays |
Other | |
Warranty | Three-year limited equipment warranty |
SMART advanced support | Designed to limit downtime and optimize return on investment, SMART Support Services provide peace of mind and maximize the performance of your SMART solution. These offerings give you access to expert support, guaranteed response times and advance hardware replacement. Three service offerings are available: Basic, Elite and Platinum. For more information, see smarttech.com/services. |