Updating system software

When the SMART Board 2000 or 2000 Pro series display is connected to the Internet, it updates the system software automatically.

When a system software update is available, the display downloads the update in the background then waits for four hours of inactivity. When that happens, the display shows a two‑minute countdown before beginning the update. The countdown can be interrupted at any time. The update begins when the countdown finishes. The display shows a blank screen for four minutes. When the update is complete, the display shows content that was on it before the update.

Applying an automatic system software update manually

If the display has downloaded the system software update but hasn’t yet applied the update, you can start the update process manually from Settings.

To apply an automatic system software update manually

1. On the display’s remote, press the Input button to open the launcher.

2. Select Settings and press OK.

3. Scroll to Auto Update.

4. Under Check for Updates Now, tap Apply Update Now.

Updating system software manually

You can download system software updates at smarttech.com/downloads and update your display using a USB drive.