Adjusting on-screen display menu settings

You can access the on-screen display menu using the menu control panel located on the side of the interactive flat panel.

Legend of the menu control panel

No.

Name

1

MENU

2

SET

3

[Up]

4

[Down]

5

[Left]

6

[Right]

To change settings in the on-screen display menu

  1. Press the MENU button on the menu control panel.

    The on-screen display menu appears.

  2. Press the up and down arrows to highlight a menu, and then press SET.

  3. Press the up and down arrows to highlight a menu option.

  4. Press the left and right arrows to change the menu option’s setting.

    OR

    Press the right arrow to open the menu option’s submenu. (Repeat steps 3 and 4 to change settings in the submenu.)

  5. Press MENU until the on-screen menu closes.

Option

Values

Function

Notes

Picture Mode

Standard

User

Dynamic

Sets the picture mode

Select User to customize brightness, contrast, sharpness and other Picture options.

Select one of the other values to set brightness, contrast, sharpness and other Picture options to default values.

Brightness

0–100

Sets the overall brightness of the image and background

You can modify this option only if you select User in Picture Mode.

Contrast

0–100

Sets the difference in brightness between the lightest and darkest parts of the image

You can modify this option only if you select User in Picture Mode.

Black Level

0–100

Sets the level of brightness in the darkest parts of the image

You can modify this option only if you select User in Picture Mode.

Color

0–100

Sets the image color depth

You can modify this option only if you select User in Picture Mode.

Sharpness

0–100

Sets the image sharpness

You can modify this option only if you select User in Picture Mode.

Color temperature

Normal

Warm

User

Cool

Sets the color temperature

Select User to customize the amount of red, green and blue in the image.

Select one of the other values to set the amount of red, green and blue in the image to default values.

Red

0–100

Sets the amount of red in the image

You can modify this option only if you select User in Color Temperature.

Green

0–100

Sets the amount of green in the image

You can modify this option only if you select User in Color Temperature.

Blue

0–100

Sets the amount of blue in the image

You can modify this option only if you select User in Color Temperature.

Local Dimming

On

Off

Enables or disables local dimming mode

This option is applicable to only SPNL‑6075 and SPNL‑6275 models.

Picture Reset

[N/A]

Resets all options in the Picture menu to their default values

[N/A]

Option

Values

Function

Notes

Volume

0–100

Sets the volume

[N/A]

Balance

L50–R50

OR

-50–50

Balances the left and right volume

[N/A]

Sound Reset

[N/A]

Resets all options in the Sound menu to their default values

[N/A]

Option

Values

Function

Notes

Language

[Languages]

Sets the on-screen display menu’s language

[N/A]

OSD Turn Off

Off

5 seconds

10 seconds

15 seconds

Sets the time of inactivity before the on-screen display menu turns off

[N/A]

OSD Reset

[N/A]

Resets all options in the OSD menu to their default values

[N/A]

Option

Values

Function

Notes

Power Save

On

Off

Enables or disables Power Save mode

When Power Save mode is enabled and there is no video input, No Signal appears on the screen for 25 seconds before the interactive flat panel turns off.

Monitor ID

1–100

Specifies a unique ID for the interactive flat panel

[N/A]

FBC Control

On

Off

Enables or disables the front control panel

[N/A]

Wake to Touch

On

Off

Enables or disables the ability to wake the interactive flat panel by touching the screen

[N/A]

Proximity

On

Off

Enables or disables presence detection

[N/A]

Re-enable Time

1Min.–10Min.

Sets how long the interactive flat panel waits before detecting motion again

[N/A]

Auto Power Off

15Min.–240Min.

Sets how long the interactive flat panel waits before turning off

[N/A]

Video input detect

Off

OPS/HDMI

OPS/DisplayPort

Specifies the default video input source when video input detection is enabled

With video input detection, the interactive flat panel shows the selected video input when there are no computers or other input sources connected.

Video input detection is useful in scenarios where a user connects a laptop to the interactive flat panel for a meeting and forgets to return to the default video input after disconnecting the laptop.

Setup Reset

[N/A]

Restores the setup settings to their default value

[N/A]

Factory Reset

[N/A]

Resets options in all menus to their default values

[N/A]

Option

Values

Function

Notes

Multi-Window Mode

Off

Dual

Quad

Sets the number of video inputs that appear on the interactive flat panel’s screen to one (Off), two (Dual) or four (Quad)

If you use this feature, be aware that SMART doesn’t support touch while multiple input sources appear on the interactive flat panel.

Audio Input

Window1

Window2

WIndow3

Window4

Sets the audio input source when multiple video inputs are displayed

You can modify this option only if you select Dual or Quad in Multi‑Window Mode.

Window1

[Depends on the model]

Select the video input for the first window

You can modify this option only if you select Dual or Quad in Multi‑Window Mode.

Window2

[Depends on the model]

Select the video input for the second window

You can modify this option only if you select Dual or Quad in Multi‑Window Mode.

Window3

[Depends on the model]

Select the video input for the third window

You can modify this option only if you select Quad in Multi‑Window Mode.

Window4

[Depends on the model]

Select the video input for the fourth window

You can modify this option only if you select Quad in Multi‑Window Mode.

Option

Values

Function

Notes

Model Number

[N/A]

Shows the interactive flat panel’s model number

[N/A]

Serial Number

[N/A]

Shows the interactive flat panel’s serial number

[N/A]

Scalar firmware version

[N/A]

Shows the interactive flat panel’s scalar firmware version

[N/A]

Touch firmware version

[N/A]

Shows the interactive flat panel’s touch firmware version

[N/A]

OPS Information

[N/A]

Indicates whether a module is installed in the accessory slot

[N/A]

Option

Values

Function

Notes

Picture Mode

Standard

User

Dynamic

Sets the picture mode

Select User to customize brightness, contrast, sharpness and other Picture options.

Select one of the other values to set brightness, contrast, sharpness and other Picture options to default values.

Brightness

0–100

Sets the overall brightness of the image and background

You can modify this option only if you select User in Picture Mode.

Contrast

0–100

Sets the difference in brightness between the lightest and darkest parts of the image

You can modify this option only if you select User in Picture Mode.

Black Level

0–100

Sets the level of brightness in the darkest parts of the image

You can modify this option only if you select User in Picture Mode.

Color

0–100

Sets the image color depth

You can modify this option only if you select User in Picture Mode.

Sharpness

0–100

Sets the image sharpness

You can modify this option only if you select User in Picture Mode.

Color temperature

Normal

Warm

User

Cool

Sets the color temperature

Select User to customize the amount of red, green and blue in the image.

Select one of the other values to set the amount of red, green and blue in the image to default values.

Red

0–100

Sets the amount of red in the image

You can modify this option only if you select User in Color Temperature.

Green

0–100

Sets the amount of green in the image

You can modify this option only if you select User in Color Temperature.

Blue

0–100

Sets the amount of blue in the image

You can modify this option only if you select User in Color Temperature.

Movie Mode

Off

Low

Middle

High

Sets the brightness, contrast, black level, color and sharpness for movie watching

[N/A]

Picture Reset

[N/A]

Resets all options in the Picture menu to their default values

[N/A]

Option

Values

Function

Notes

Sound Mode

Treble

L50–R50

Sets the high frequency sound

[N/A]

Bass

L50–R50

Sets the low frequency sound

[N/A]

EQ

120 Hz

0–100

Sets the sound equalization at 120 Hz

[N/A]

500 Hz

0–100

Sets the sound equalization at 500 Hz

[N/A]

1.2 kHz

0–100

Sets the sound equalization at 1.2 kHz

[N/A]

7.5 kHz

0–100

Sets the sound equalization at 7.5 kHz

[N/A]

12 kHz

0–100

Sets the sound equalization at 12 kHz

[N/A]

Balance

L50–R50

OR

-50–50

Balances the left and right volume

[N/A]

Audio Input

[Depends on the current video input]

Sets the audio input source

If HDMI is the current video input, the available values are HDMI and USB.

If OPS/HDMI is the current video input, the available values are OPS Digital and USB.

Sound Reset

[N/A]

Resets all options in the Sound menu to their default values

[N/A]

Option

Values

Function

Notes

Language

[Languages]

Sets the on-screen display menu’s language

[N/A]

OSD Turn Off

Off

5 seconds

10 seconds

15 seconds

Sets the time of inactivity before the on-screen display menu turns off

[N/A]

OSD Reset

[N/A]

Resets all options in the OSD menu to their default values

[N/A]

Option

Values

Function

Notes

Power Save

On

Off

Enables or disables Power Save mode

When Power Save mode is enabled and there is no video input, No Signal appears on the screen for 90 seconds before the interactive flat panel turns off.

Monitor ID

1–100

Specifies a unique ID for the interactive flat panel

[N/A]

FBC Control

On

Off

Enables or disables the front control panel

[N/A]

Proximity

On

Off

Enables or disables presence detection

[N/A]

Re-enable Time

1Min.–10Min.

Sets a period of time between when the interactive flat panel is turned off and when it detects motion again

Set this option to give users enough time to leave the room after they turn off the interactive flat panel.

Auto Power Off

15Min.–240Min.

Sets how long the interactive flat panel waits between when it last detects motion and when it turns off

[N/A]

Video input detect

On

Off

Enables or disables video input detection

With video input detection, the interactive flat panel shows the selected video input when there are no computers or other input sources connected.

Video input detection is useful in scenarios where a user connects a laptop to the interactive flat panel for a meeting and forgets to return to the default video input after disconnecting the laptop.

Lync Room Reset

[N/A]

Resets options in all menus to their default values (for a SMART Room System for Skype for Business)

[N/A]

Setup Reset

[N/A]

Restores the setup settings to their default value

[N/A]

Factory Reset

[N/A]

Resets options in all menus to their default values

[N/A]

Option

Values

Function

Notes

Model Number

[N/A]

Shows the interactive flat panel’s model number

[N/A]

Serial Number

[N/A]

Shows the interactive flat panel’s serial number

[N/A]

Scaler firmware version

[N/A]

Shows the interactive flat panel’s scaler firmware version

[N/A]

Touch firmware version

[N/A]

Shows the interactive flat panel’s touch firmware version

[N/A]

OPS Information

[N/A]

Indicates whether a module is installed in the accessory slot

[N/A]

Models

  • SMART kapp iQ Pro 55
  • SMART kapp iQ Pro 65
  • SMART kapp iQ Pro 65-V2
  • SMART kapp iQ Pro 75

Keywords

  • on-screen display menu
  • menu control panel
  • picture
  • sound
  • audio
  • languages
  • video input detection

Related documents