Moving the stand

Warning 

  • Do not move the stand while external cables are connected or when the power is on.

  • Move the display to its lowest position before you move the stand.

  • Secure all cords and cabling before you move the stand.

  • Two or more people are required to move the stand.

  • Move a floor stand-mounted display with care. Quick stops, excessive force, and uneven surfaces can cause the stand to overturn.

  • Do not use the handles to lift the stand.

To move the stand

  1. Shut down the mounted display and accessories.

  2. On FSE-500 and FSE-520 models, press and hold the Down button on the control panel until the display reaches its lowest position.

    OR

    On FSE-510 models, press down and hold the control switch until the display reaches its lowest position

  3. Turn off all connected devices.

  4. Remove all loose items from the stand and the storage cabinet.

  5. Unplug the stand and any other connected devices or appliances, then secure all cables.

  6. Flip the caster brakes up to unlock them.

  7. Carefully push the center point of the legs to move the stand. Do not push on the upper part of the stand, as this might cause it to tip over.

  8. After the stand is moved, lock the caster brakes and secure the stand in place.

  9. Connect the power cable to the outlet and secure any cables that run along the floor.