Calibrating the stand

After assembling the stand, you must calibrate it before you start to use it.

To calibrate the stand

  1. Connect the stand to a power outlet.

  2. Press the Down button and lower the stand to the lowest position.


  3. Press the Down button again and hold for five seconds. The stand lowers then bounces up slightly.

  4. Release the Down button

To calibrate the FSE-510 stand

  1. Connect the stand to a power outlet.

  2. To unlock the stand, simultaneously press the Up and Down buttons and hold for four seconds.


  3. Press the Down button and lower the stand to the lowest position.


  4. Press the Down button again and hold for five seconds. The stand lowers then bounces up slightly.

  5. Release the Down button.