Moving the stand
Warning
Do not use the handles to lift the stand.
Do not move the stand while external cables are connected or when the power is on.
Move the display to its lowest position before you move the stand.
Secure all cords and cabling before you move the stand.
Two or more people are required to move the stand.
Move a floor stand-mounted display with care. Quick stops, excessive force, and uneven surfaces may cause the stand to overturn.
To move the stand
Shut down the mounted display and accessories.
On FSE-400 and FSE-420 models, press and hold the Down button on the control panel until the display reaches its lowest position.
OR
On FSE-410 models, press down and hold the control switch until the display reaches its lowest position
Flick the power switch to the off position.
Remove all loose items from the stand and the storage cabinet.
Unplug the stand from the power outlet and secure all cables.
Flip the caster brakes up to unlock them.
Carefully push the center point of the legs to move the stand. Do not push on the upper part of the stand, as this might cause it to tip over.
After the stand is moved, flip the caster brakes down to lock them and secure the stand in place.
Connect the power cable to the outlet and secure any cables that run along the floor.