Certification and compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause undesired operation.

This device complies with RSS-247 of the Innovation, Science and Economic Development Canada Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause undesired operation.

Radiation exposure statement

Model AEM-1: This wireless equipment complies with government limits for exposure to radio frequency (RF) radiation. The values shown represent the worst-case results; in normal operation the exposure may be lower. As defined by the FCC OET Bulletin 65, IEEE C95.1, and Canada RSS-102, the maximum SAR limit is 1.6 W/kg over 1 g of tissue.

Model AER-1: This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the antenna of this device and all nearby persons. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Cet appareil est conforme à la norme ISED CNR-247 pour les appareils radio agréés. Son fonctionnement est soumis aux deux conditions suivantes:

1. le dispositif ne doit pas produire de brouillage préjudiciable, et

2. ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Déclaration d’exposition aux radiations

Modèle AEM-1 : cet équipement sans fil respecte les limites gouvernementales en termes d'exposition aux rayonnements radio. Les valeurs qui s'affichent représentent les résultats les plus affiches ; en fonctionnement normal, l'exposition peut être inférieure. Comme définie par la norme IEEE C95.1 et le Canada RSS-102, la limite DER maximale est de 1,6 W/kg sur 1 g de chiffon.

Modèle AER-1 : Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Cet émetteur ne doit pas être co- implantés ou exploités conjointement avec une autre antenne ou émetteur.

Hereby SMART Technologies ULC declares that the radio equipment models AEM-1 (microphone) and AER-1 (receiver), are in compliance with Directive 2014/53/EU.

Hereby SMART Technologies ULC declares that the AEC-1 (charging case) complies with Directive 2014/30/EU

The full text of the EU declaration of conformity is available at the following internet address: smarttech.com/compliance

The frequency band and the maximum transmitted power in EU are listed below:

SMART Technologies supports global efforts to ensure that electronic equipment is manufactured, sold, and disposed of in a safe and environmentally friendly manner.

Waste Electrical and Electronic Equipment (WEEE Directive)

Electrical and electronic equipment and batteries contain substances that can be harmful to the environment and to human health. The crossed-out wheeled bin symbol indicates that products should be disposed of in the appropriate recycling stream and not as regular waste.

Batteries (Battery Regulation)

The microphone contains a 100 mAh rechargeable lithium-ion polymer battery (model 421624), and the charging case contains a 300 mAh rechargeable lithium-ion polymer battery (model 452332). The batteries are replaceable in the microphone and charging case. When replacing a battery recycle and dispose of old batteries in compliance with local rules.

A video providing instructions on how to replace the batteries is available on the Training and videos page.

SeeTraining and videos

Replacement batteries

Caution 

• Replacing a battery with an incorrect type may result in a fire or explosion. Before replacing a battery, confirm the correct model (see above).

• Dispose of used batteries in accordance with local hazardous waste regulations.

• Do not place batteries in household waste, recycling bins, or landfills. Before taking batteries to a drop‑off center, cover the terminals with non-conductive tape (such as electrical tape).

• Do not dispose of batteries in fire; they may rupture or explode.

• Keep used batteries intended for disposal out of the reach of children. Even used batteries can pose a health risk and may cause serious or fatal injury.

REACH regulation

This product may contain substances that are candidate SVHCs under the EU REACH Regulation (EC) 1907/2006.

Seeecha.europa.eu/scip-database for the latest information.