Using a microscope with your document camera

1. Select the appropriate rubber coupler size for the microscope eyepiece and insert it in the microscope adapter.

   

2. Attach the microscope adapter to the document camera and tighten the three bolts until the adapter is secured.

   

   Important 

   Make sure the arrow on the camera head and microscope adapter are on the same side.

3. Attach the microscope adapter to the microscope's eyepiece and then connect the document camera to the microscope.

   

4. Turn the microscope adapter counterclockwise to line up the arrows and lock the microscope adapter in place.

To optimize microscope images

1. Press Info on the control panel or remote control to open the on-screen display (OSD) menu.

2. Select the Image tab.

3. Browse to the Preview Mode sub-menu and press .

4. Select Microscope and press .

5. Adjust and aim the camera head at the furthest point, and then press the AUTO FOCUS button on the control panel or remote control.

6. Adjust the microscope’s focus as needed.

1. Place a slide or object on the stage of the microscope.

2. Focus the microscope so that the subject is sharp.

3. Position the microscope under your document camera so the camera lens is aligned with the microscope eyepiece.

   Caution 

   Ensure you do not hit your document camera lens with the microscope. This could damage your document camera’s lens.

4. Press the CAMERA/PC button on the control panel or remote control so that the document camera is in Camera mode.

5. Press Info on the control panel or remote control to open the on-screen display (OSD) menu.
   

6. Select the Image tab.

7. Navigate to the Preview Mode sub-menu, and press .

8. Select Microscope and press .