Components

The SMART Document Camera has a flexible arm for positioning the lens at any angle. The camera head has LED overhead lighting to enhance lighting conditions.

The SMART document camera 650 components

The SMART Document Camera 650 consists of the following components:

No.

Name

1

Camera head

2

LED light

3

Camera arm

4

IR sensor

5

Control panel

6

Built-in mic

7

Front panel

8

Right panel

9

Handle

The control panel to enables you to switch among Camera and Computer Pass-Through modes. You can also use the control panel to adjust the settings and features in the Camera mode’s on-screen display (OSD) menu.

Labelled image of the front control panel

The document camera’s control panel consists of the following:

No.

Name

More information

1

Power/Power indicator

  • Turn the document camera ON/OFF

  • Power indicator:

    • Solid red: Standby

    • No light: Power off

    • Solid green: Power on

2

Wi-Fi connection indicator

  • Solid blue: P2P / Wi-Fi Mode Ready

  • Slow flashing blue: Camera is connected to the SMART Document Camera software

  • Short flashing blue: Connecting to Wi-Fi

  • Quick flashing green: Scanning for a Miracast device

  • Slow flashing green: Starting Miracast stream

  • Solid green: Connected to a Miracast device

3

Zoom in/out

and

Navigate up/down

  • Increase or decrease the image magnification in Camera mode

  • Access options from the OSD menu

4

Brightness increase/decrease

and

Navigate left/right

  • Increase or decrease the level of brightness when capturing a live images

  • Access options from the OSD menu

5

Auto-Focus / Select

  • Automatically adjust focus

  • Selection option

6

Wi-Fi/USB mode

  • Switch between using Wi-Fi or the USB connection mode

7

Record

  • Start or stop recording video and audio

8

Freeze

  • Pause or resume an image frame in Camera mode

9

Lamp

  • Turn the overhead light ON/OFF

10

Capture

  • Capture an image in Camera mode

11

Info

  • Access the on-screen display (OSD) menu

12

Camera/PC mode

Labelled image of the right connection panel

The right panel of the document camera consists of the following:

No.

Name

More information

1

HDMI input

  • Use to connect a computer to the document camera

2

HDMI output

  • Use to connect to an external display (monitor, projector, or interactive display)

3

DC power jack

  • Use to recharge the document camera’s battery

Labelled image of the right connection panel

The front panel of the document camera consists of the following:

No.

Name

More information

1

Battery charge indicator

  • Solid green:

    • Three power bars: battery is fully charged

    • Two power bars: battery is 30 to 60% charged

    • One power bar: battery is 5 to 30% charged

  • Solid red: Battery is 0 to 5% charged

  • Flashing red: Battery is out of power

  • Solid orange: Battery needs servicing; contact SMART support

2

USB mini port

  • Port for connecting the document camera to a computer using a USB connection

3

USB port

  • Port for a USB flash drive

4

Wi-Fi dongle receiver

  • Receiver for the Wi-Fi dongle

5

Anti-theft slot

  • Attachment for a Kensington compatible lock

All features of the SMART Document Camera 650 can be accessed with the remote control. The remote control requires two AAA batteries.

No.NameMore information

1

Power

  • Turn the document camera ON/OFF

2

WiFi/USB

  • Switch between Wi-Fi and USB connection mode

3

Mute

  • Mute the volume

4

Camera/PC mode

5

Capture

  • Capture still image in Camera mode. When in continuous capture mode, press this button again to stop.

6

Record

  • Start or stop recording video and audio

    Note 

    Video recording can be saved to a connected USB drive or a connected computer only when using SMART Notebook or SMART Document Camera 650 software.

7

Resolution

  • Press to switch among the following modes:

    • Auto detect

    • 1024 × 768 (if the HDMI device supports it)

    • K 60Hz (if the HDMI device supports it)

8

Freeze

  • Pause or resume an image frame in Camera mode

9

Auto-Exposure lock

  • Lock the exposure to stop the document camera from adjusting the exposure automatically

10

Lamp

  • Turn the overhead light ON/OFF

11

Rotate

  • Rotate an image in Camera mode

12

Mode

  • Switch among Normal, High frame, High quality, Microscope, Infinity, or Macro modes.

13

Delete

  • Delete image or video in Playback mode

14

Info

  • Press to view system information and battery status

15

Select

  • Press to make a selection

16

Navigate

  • Navigate through the on-screen display menu (OSD)

17

Auto-focus

  • Automatically adjust focus

18

Zoom In/Out

  • Increase or decrease the image magnification on camera and picture Camera mode

19

Volume

  • Adjust the volume

20Brightness

  • Increase or decrease the brightness when capturing live images

21

Zoom 1X

  • Reset to default zoom magnification (100%)

22

Reset

  • Reset to factory default settings

Your document camera comes with a power adapter, including a country specific power cord (for EU, UK, and North America) that connects to the external power supply.

Use the USB cable to connect your document camera to your computer. You can display objects, capture images to SMART Notebook files, and control your document camera from SMART Notebook software.

If you need to extend the USB connection, see the Troubleshooting and extending USB 2.0 and USB 3.0 connection knowledge base article for guidance.

Learn more about setting up a connection using the USB method.

Use the Wi-Fi dongle to connect your document camera to the network.

See Using the HDMI method to connect.

Models

  • SDC-650

Keywords

  • camera head
  • camera lens
  • LED light
  • camera arm
  • control panel
  • right panel
  • left panel
  • rear panel
  • remote control
  • power adapter
  • USB cable
  • Wi-Fi dongle
  • microscope adapter
  • anti-glare sheet

Related documents