Setting document camera modes

  1. Connect your document camera to your computer with the USB cable.

  2. Set the TV/RGB to RGB on the right side of the connection panel.

  3. Connect your document camera to a projector, monitor, or TV with an HDMI cable.

  4. Press the CAMERA/PC button on the control panel.

    OR

    Press the CAMERA button on the remote control.

  1. Connect your document camera to your computer with the USB cable.

  2. Connect your computer with the HDMI cable to your document camera’s HDMI IN receptacle.

  3. Connect your display device with another HDMI cable to your document camera’s HDMI OUT receptacle.

  4. Press the CAMERA/PC button on the control panel or remote control.

    OR

    Press the PC 1/2 button on the remote control.

  1. Disconnect the USB cable from the rear connection panel.

  2. Connect your document camera to a projector or a monitor with the HDMI cable or to a TV with the composite video adapter cable.

  3. Press the PLAYBACK button on the control panel or remote control.

Models

  • SMART Document Camera 550

Keywords

  • Camera mode
  • Computer Pass-Through mode
  • Playback mode

Related documents