Displaying printed documents

To display printed documents

1. Place your documents on the table.

2. Adjust the document camera, and then aim its lens at your documents.

3. Press AUTO FOCUS on the control panel to adjust the focus.

   or

   Press the AUTO FOCUS button on the remote control to adjust the focus.

If glare makes it difficult for you to read the printed documents that you’re displaying, place the anti-glare sheet on top of the documents.

1. Set your document camera to Camera mode.

2. Press the MENU button on the control panel or remote control.

   The OSD menu appears.

3. Press the right arrow button on the control panel or remote control to navigate to the Image menu, and then press the button on the control panel or remote control.

4. Press the down arrow button on the control panel or remote control to navigate to the Mode sub-menu, and then press the button on the control panel or remote control.

5. Press the right arrow button on the control panel or remote control to navigate to Text mode, and then press the button on the control panel or remote control.

To optimize the camera for documents with graphics

1. Set your document camera to Camera mode.

2. Press the MENU button on the control panel or remote control.

   The OSD menu appears.

3. Press the right arrow button on the control panel or remote control to navigate to the Image menu, and then press the button on the control panel or remote control.

4. Press the down arrow button on the control panel or remote control to navigate to the Mode sub-menu, and then press the button on the control panel or remote control.

5. Press the right arrow button on the control panel or remote control to navigate to Graphic mode, and then press the button on the control panel or remote control.