Using Camera mode

When your document camera is connected to a projector, interactive display, or TV you can display a full-screen image from your document camera.

You can use your document camera in Camera mode to perform the following tasks:

  • Display objects.

  • Capture images to an SD/SDHC card.

  • Capture images to SMART Notebook software.

  • Use the features and settings in the OSD menu.

  • Use a microscope with a standard eyepiece and additional adapters.

Important 

Your document camera must be connected to a display when using the OSD menu.

  1. Connect your document camera to a projector or flat-panel display with the appropriate cable.

  2. Press the CAMERA/PC button on the control panel.

    OR

    Press the CAMERA button on the remote control.

  1. Press the CAMERA/PC button on the control panel.

    OR

    Press the CAMERA button on the remote control.

  2. Place the object you want to display under the camera.

  3. Rotate the camera head to aim the lens at your object.

To record a video

  1. Insert an SD/SDHC card or USB drive into the appropriate receptacle.

  2. Press the RECORDING button on the control panel to start recording.

    OR

    Press the RECORD button on the remote control to start recording.

To stop recording a video

  1. Press the FREEZE/STOP button on the control panel or remote control to stop recording.

Models

  • SMART Document Camera 550

Keywords

  • camera mode
  • displaying images
  • recording videos

Related documents