Using input devices

You can connect a mobile device, MP3 player or computer to SMART Audio 400. Using a 3.5 mm audio cable, connect your device to the AUDIO IN receptacle on the microphone or receiver.

To connect a device to the teacher or student microphone

Note 

Set the device’s volume to 80–90% of its maximum volume. Then use the volume controls on the teacher or student microphone.

  1. Using an audio cable that with 3.5 mm stereo plugs on both ends, connect the cable to the AUDIO IN receptacle on the microphone.

  2. Connect the cable to the headphone receptacle on the mobile device, MP3 player or computer.

  3. Use the volume control on the mobile device, MP3 player or computer to set the playback volume.

    OR

    If the LINE LED is lit, use the microphone’s volume controls to adjust the volume.

  1. On the teacher microphone, press the SELECT button until the LINE LED is lit.

  2. Use the UP or DOWN buttons to adjust the volume.

Models

  • SMART Audio 400

Keywords

  • connecting input devices
  • adjusting volume

Related documents